All MIBs › CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB › crepIfOperStatus
crepIfOperStatus
Module: CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
OID (symbolic): CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB::crepIfOperStatus
OID (numeric): 1.3.6.1.4.1.9.9.601.1.2.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the current operational link state of the REP port. If a REP configured interface is down, it will be in 'initDown' state.
'none' - REP is not operational on the interface. This value is used when sending the crepLinkStatus notification when REP configuration is removed from the interface.
'initDown' - initial REP link state.
'noNeighbor' - state in which REP is yet to discover its neighbor.
'oneWay' - the state in which messages have been received from the neighbor but the link has not been declared to be twoWay yet.
'twoWay' - the fully operational state for REP.
'flapping' - the state in which there is a mismatch in the received port information (either local or remote) for the neighbor.
'wait' - the forced transient state before REP starts discovering its neighbor.
'unknown' - the link state cannot be determined.
What is crepIfOperStatus?
Read-only value reporting the current operational link state of a REP-enabled port, such as not operational or in an init-down state when the configured interface is down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.601.1.2.1.1.3 snmpwalk -v2c -c public <target> CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB::crepIfOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.601.1.2.1.1.3.1 snmpget -v2c -c public <target> CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB::crepIfOperStatus.1
Start monitoring Cisco switches configured for Resilient Ethernet Protocol (REP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB::crepIfOperStatus OID value, configure state conditions and alerts, and monitor any Cisco switches configured for Resilient Ethernet Protocol (REP) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.601 | ciscoResilientEthernetProtocolMIB | CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB |
| 1.3.6.1.4.1.9.9.601.1 | ciscoRepMIBObjects | CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB |
| 1.3.6.1.4.1.9.9.601.1.2 | crepInterfaceConfig | CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB |
| 1.3.6.1.4.1.9.9.601.1.2.1 | crepInterfaceConfigTable | CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB |
| 1.3.6.1.4.1.9.9.601.1.2.1.1 | crepInterfaceConfigEntry | CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.3 | crepIfOperStatus | CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB |