CISCO-REMOTE-ACCESS-MONITOR-MIB :: crasGlobalOutOctets

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-REMOTE-ACCESS-MONITOR-MIBcrasGlobalOutOctets

crasGlobalOutOctets

Module: CISCO-REMOTE-ACCESS-MONITOR-MIB

OID (symbolic): CISCO-REMOTE-ACCESS-MONITOR-MIB::crasGlobalOutOctets

OID (numeric): 1.3.6.1.4.1.9.9.392.1.3.9

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The total number of octets transmitted by all currently and previously active remote access sessions.

This value is accumulated AFTER determining whether or not the packet should be compressed.

What is crasGlobalOutOctets?

This 64-bit counter tracks cumulative bytes transmitted across all remote-access sessions, measured after the decision on whether to compress has been made, meaning it reflects the actual on-the-wire outbound traffic volume, not the pre-compression size of the original data. It matters for the same bandwidth-utilization purpose as crasGlobalInOctets but for the outbound direction, letting an admin assess actual outbound link consumption by remote-access traffic. Comparing this against crasGlobalOutUncompOctets reveals how much outbound bandwidth compression is actually saving in practice on this device.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.392.1.3.9
snmpwalk -v2c -c public <target> CISCO-REMOTE-ACCESS-MONITOR-MIB::crasGlobalOutOctets

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.392.1.3.9.1
snmpget -v2c -c public <target> CISCO-REMOTE-ACCESS-MONITOR-MIB::crasGlobalOutOctets.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> crasGlobalOutOctets.1

Start monitoring Cisco VPN concentrator/remote-access router with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-REMOTE-ACCESS-MONITOR-MIB::crasGlobalOutOctets OID value, configure state conditions and alerts, and monitor any Cisco VPN concentrator/remote-access router from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.392ciscoRemoteAccessMonitorMIBCISCO-REMOTE-ACCESS-MONITOR-MIB
1.3.6.1.4.1.9.9.392.1ciscoRasMonitorMIBObjectsCISCO-REMOTE-ACCESS-MONITOR-MIB
1.3.6.1.4.1.9.9.392.1.3crasActivityCISCO-REMOTE-ACCESS-MONITOR-MIB
1.3.6.1.4.1.9.9.392.1.3.9crasGlobalOutOctetsCISCO-REMOTE-ACCESS-MONITOR-MIB