All MIBs › CISCO-QOS-PIB-MIB › qosPolicerNormalBurst
qosPolicerNormalBurst
Module: CISCO-QOS-PIB-MIB
OID (symbolic): CISCO-QOS-PIB-MIB::qosPolicerNormalBurst
OID (numeric): 1.3.6.1.4.1.9.18.2.1.5.1.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description:
The normal size of a burst in terms of bits.
What is qosPolicerNormalBurst?
This object specifies the normal burst size, measured in bits, that a token-bucket policer allows without dropping frames during traffic shaping. The burst size defines how much traffic can exceed the sustained rate before frames are discarded. An operator sets this to control whether bursty applications are accommodated or strictly limited to their provisioned committed rate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.18.2.1.5.1.1.3 snmpwalk -v2c -c public <target> CISCO-QOS-PIB-MIB::qosPolicerNormalBurst
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.18.2.1.5.1.1.3.1 snmpget -v2c -c public <target> CISCO-QOS-PIB-MIB::qosPolicerNormalBurst.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.18.2.1 | ciscoQosPIBMIB | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.5 | qosPolicer | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.5.1 | qosPolicerTable | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.5.1.1 | qosPolicerEntry | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.5.1.1.3 | qosPolicerNormalBurst | CISCO-QOS-PIB-MIB |