All MIBs › CISCO-QOS-PIB-MIB › qosL2Cos
qosL2Cos
Module: CISCO-QOS-PIB-MIB
OID (symbolic): CISCO-QOS-PIB-MIB::qosL2Cos
OID (numeric): 1.3.6.1.4.1.9.18.2.1.3.1.1.3
Node type: OBJECT-TYPE
Type: QosLayer2Cos
Access: read-only
Description:
The L2 CoS value to use when mapping this DSCP to layer 2 CoS.
What is qosL2Cos?
This OID specifies the Layer 2 priority class (CoS value from 0-7) assigned to traffic matching a particular QoS policy. This priority determines how the network switch prioritizes the packet on the wire. An operator would check this to verify that specific traffic types (voice, video, data) are assigned the correct priority level.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.18.2.1.3.1.1.3 snmpwalk -v2c -c public <target> CISCO-QOS-PIB-MIB::qosL2Cos
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.18.2.1.3.1.1.3.1 snmpget -v2c -c public <target> CISCO-QOS-PIB-MIB::qosL2Cos.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.18.2.1 | ciscoQosPIBMIB | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.3 | qosDomainConfig | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.3.1 | qosDiffServMappingTable | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.3.1.1 | qosDiffServMappingEntry | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.3.1.1.3 | qosL2Cos | CISCO-QOS-PIB-MIB |