All MIBs › CISCO-QOS-PIB-MIB › qosIpAceSrcL4PortMax
qosIpAceSrcL4PortMax
Module: CISCO-QOS-PIB-MIB
OID (symbolic): CISCO-QOS-PIB-MIB::qosIpAceSrcL4PortMax
OID (numeric): 1.3.6.1.4.1.9.18.2.1.7.1.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
The maximum value that the packet's layer 4 source port number can have and match this ACE.
What is qosIpAceSrcL4PortMax?
This object defines the maximum source port number (0-65535 on the TCP/UDP transport layer) that a packet can have and still match a Quality of Service Access Control Entry (ACE) rule. It is used in conjunction with a minimum port to define a range of source ports subject to a particular QoS policy. An operator would configure this to match packets from specific applications or services and apply consistent forwarding or rate-limiting policies.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.18.2.1.7.1.1.12 snmpwalk -v2c -c public <target> CISCO-QOS-PIB-MIB::qosIpAceSrcL4PortMax
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.18.2.1.7.1.1.12.1 snmpget -v2c -c public <target> CISCO-QOS-PIB-MIB::qosIpAceSrcL4PortMax.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.18.2.1 | ciscoQosPIBMIB | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.7 | qosIpQos | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.7.1 | qosIpAceTable | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.7.1.1 | qosIpAceEntry | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.7.1.1.12 | qosIpAceSrcL4PortMax | CISCO-QOS-PIB-MIB |