All MIBs › CISCO-QOS-PIB-MIB › qosIpAceDstL4PortMin
qosIpAceDstL4PortMin
Module: CISCO-QOS-PIB-MIB
OID (symbolic): CISCO-QOS-PIB-MIB::qosIpAceDstL4PortMin
OID (numeric): 1.3.6.1.4.1.9.18.2.1.7.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
The minimum value that the packet's layer 4 dest port number can have and match this ACE.
What is qosIpAceDstL4PortMin?
This object specifies the lower boundary value for layer 4 (TCP/UDP) destination port numbers when matching network packets against a QoS access control entry. Network operators use this to define port-based traffic classification rules, allowing different handling of packets destined to specific port ranges. For example, setting a minimum port of 80 would match only traffic destined to ports 80 and higher in the configured range.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.18.2.1.7.1.1.9 snmpwalk -v2c -c public <target> CISCO-QOS-PIB-MIB::qosIpAceDstL4PortMin
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.18.2.1.7.1.1.9.1 snmpget -v2c -c public <target> CISCO-QOS-PIB-MIB::qosIpAceDstL4PortMin.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.18.2.1 | ciscoQosPIBMIB | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.7 | qosIpQos | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.7.1 | qosIpAceTable | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.7.1.1 | qosIpAceEntry | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.7.1.1.9 | qosIpAceDstL4PortMin | CISCO-QOS-PIB-MIB |