All MIBs › CISCO-QOS-PIB-MIB › qosIpAceDscpMax
qosIpAceDscpMax
Module: CISCO-QOS-PIB-MIB
OID (symbolic): CISCO-QOS-PIB-MIB::qosIpAceDscpMax
OID (numeric): 1.3.6.1.4.1.9.18.2.1.7.1.1.7
Node type: OBJECT-TYPE
Type: Dscp
Access: read-only
Description:
The maximum value that the DSCP in the packet can have and match this ACE.
What is qosIpAceDscpMax?
This read-only object specifies the maximum DSCP value that a packet can have to match a Quality-of-Service Access Control Entry rule. It defines the upper boundary of DSCP-based matching. QoS engineers use this to verify ACE configurations and ensure proper traffic classification based on IP precedence.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.18.2.1.7.1.1.7 snmpwalk -v2c -c public <target> CISCO-QOS-PIB-MIB::qosIpAceDscpMax
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.18.2.1.7.1.1.7.1 snmpget -v2c -c public <target> CISCO-QOS-PIB-MIB::qosIpAceDscpMax.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.18.2.1 | ciscoQosPIBMIB | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.7 | qosIpQos | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.7.1 | qosIpAceTable | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.7.1.1 | qosIpAceEntry | CISCO-QOS-PIB-MIB |
| 1.3.6.1.4.1.9.18.2.1.7.1.1.7 | qosIpAceDscpMax | CISCO-QOS-PIB-MIB |