CISCO-PSM-MIB :: cpsmPortBindDiffConfigDb

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-PSM-MIBcpsmPortBindDiffConfigDb

cpsmPortBindDiffConfigDb

Module: CISCO-PSM-MIB

OID (symbolic): CISCO-PSM-MIB::cpsmPortBindDiffConfigDb

OID (numeric): 1.3.6.1.4.1.9.9.364.1.1.13.1.3

Node type: OBJECT-TYPE

Type: CpsmDiffDb

Access: read-write

Description: This object specifies the database for the comparison.

This object when set to 'configDb(1)' compares the configuration database with respect to active database on this VSAN/VLAN. So, the active database will be the reference database and the results of the difference operation will be with respect to the active database.

This object when set to 'activeDb(2)' compares the active database with respect to configuration database on this VSAN/VLAN. So, the configuration database will be the reference database and the results of the difference operation will be with respect to the configuration database.

No action is taken when this object is set to 'noop(3)'.

The value of this object when read is always 'noop'.

What is cpsmPortBindDiffConfigDb?

A read-write object that selects which database (e.g. configured vs. active) to use when comparing port binding configurations for a VSAN/VLAN.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.364.1.1.13.1.3
snmpwalk -v2c -c public <target> CISCO-PSM-MIB::cpsmPortBindDiffConfigDb

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.364.1.1.13.1.3.1
snmpget -v2c -c public <target> CISCO-PSM-MIB::cpsmPortBindDiffConfigDb.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.364.1.1.13.1.3.1 s <value>

Start monitoring Cisco MDS SAN switch (Fibre Channel Port Security Manager) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-PSM-MIB::cpsmPortBindDiffConfigDb OID value, configure state conditions and alerts, and monitor any Cisco MDS SAN switch (Fibre Channel Port Security Manager) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.364ciscoPsmMIBCISCO-PSM-MIB
1.3.6.1.4.1.9.9.364.1ciscoPsmMIBObjectsCISCO-PSM-MIB
1.3.6.1.4.1.9.9.364.1.1cpsmConfigurationCISCO-PSM-MIB
1.3.6.1.4.1.9.9.364.1.1.13cpsmPortBindDiffConfigTableCISCO-PSM-MIB
1.3.6.1.4.1.9.9.364.1.1.13.1cpsmPortBindDiffConfigEntryCISCO-PSM-MIB
1.3.6.1.4.1.9.9.364.1.1.13.1.3cpsmPortBindDiffConfigDbCISCO-PSM-MIB