All MIBs › CISCO-PSM-MIB › cpsmPortBindAutoLearnEnable
cpsmPortBindAutoLearnEnable
Module: CISCO-PSM-MIB
OID (symbolic): CISCO-PSM-MIB::cpsmPortBindAutoLearnEnable
OID (numeric): 1.3.6.1.4.1.9.9.364.1.1.9.1.3
Node type: OBJECT-TYPE
Type: CpsmAutoLearnEnable
Access: read-write
Description: This object helps to 'learn' the valid port binding configuration of devices/ports logged into the local device on all its ports and populate the above enforced port binding table (cpsmPortBindEnfTable) with the same.
This mechanism of 'learning' the configuration of devices/ports logged into the local device over a period of time and populating the configuration is a convenience mechanism for users.
If this object is set to 'on(1)' on a particular VSAN/VLAN, all subsequent logins (FLOGIs) on that VSAN/VLAN will be populated in the enforced port binding database, provided it is not in conflict with existing enforced port bindings on that VSAN/VLAN.
When this object is set to 'off(2)', the mechanism of learning is stopped. The learned entries will however be in the enforced port binding database.
What is cpsmPortBindAutoLearnEnable?
A read-write control used to enable automatic learning of valid port-binding configurations from devices logged into the local device's ports, populating the enforced port-binding table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.364.1.1.9.1.3 snmpwalk -v2c -c public <target> CISCO-PSM-MIB::cpsmPortBindAutoLearnEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.364.1.1.9.1.3.1 snmpget -v2c -c public <target> CISCO-PSM-MIB::cpsmPortBindAutoLearnEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.364.1.1.9.1.3.1 s <value>
Start monitoring Cisco MDS SAN switch (Fibre Channel Port Security Manager) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-PSM-MIB::cpsmPortBindAutoLearnEnable OID value, configure state conditions and alerts, and monitor any Cisco MDS SAN switch (Fibre Channel Port Security Manager) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.364 | ciscoPsmMIB | CISCO-PSM-MIB |
| 1.3.6.1.4.1.9.9.364.1 | ciscoPsmMIBObjects | CISCO-PSM-MIB |
| 1.3.6.1.4.1.9.9.364.1.1 | cpsmConfiguration | CISCO-PSM-MIB |
| 1.3.6.1.4.1.9.9.364.1.1.9 | cpsmPortBindAutoLearnTable | CISCO-PSM-MIB |
| 1.3.6.1.4.1.9.9.364.1.1.9.1 | cpsmPortBindAutoLearnEntry | CISCO-PSM-MIB |
| 1.3.6.1.4.1.9.9.364.1.1.9.1.3 | cpsmPortBindAutoLearnEnable | CISCO-PSM-MIB |