All MIBs › CISCO-PSM-MIB › cpsmFabricBindAutoLearnEnable
cpsmFabricBindAutoLearnEnable
Module: CISCO-PSM-MIB
OID (symbolic): CISCO-PSM-MIB::cpsmFabricBindAutoLearnEnable
OID (numeric): 1.3.6.1.4.1.9.9.364.1.1.10.1.3
Node type: OBJECT-TYPE
Type: CpsmAutoLearnEnable
Access: read-write
Description: This object helps to 'learn' the valid fabric binding configuration of devices logged into the fabric thru' the ports on the local device and populate the above enforced fabric binding table (cpsmFabricBindEnfTable) with the same.
This mechanism of 'learning' the configuration of devices logged into the fabric over a period of time and populating the enforced fabric binding table is a convenience mechanism for users.
If this object is set to 'on(1)' on a particular VSAN/VLAN, all subsequent attempts to join the fabric on some port on the local device on that VSAN/VLAN will be populated in the enforced fabric binding database, provided it is not in conflict with existing enforced fabric bindings on that VSAN/VLAN.
When this object is set to 'off(2)', the mechanism of learning is stopped. The learned entries however will be in the enforced fabric binding database.
What is cpsmFabricBindAutoLearnEnable?
A read-write control used to enable automatic learning of valid fabric-binding configurations from devices logged into the fabric via the local device's ports, populating the enforced fabric-binding table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.364.1.1.10.1.3 snmpwalk -v2c -c public <target> CISCO-PSM-MIB::cpsmFabricBindAutoLearnEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.364.1.1.10.1.3.1 snmpget -v2c -c public <target> CISCO-PSM-MIB::cpsmFabricBindAutoLearnEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.364.1.1.10.1.3.1 s <value>
Start monitoring Cisco MDS SAN switch (Fibre Channel Port Security Manager) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-PSM-MIB::cpsmFabricBindAutoLearnEnable OID value, configure state conditions and alerts, and monitor any Cisco MDS SAN switch (Fibre Channel Port Security Manager) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.364 | ciscoPsmMIB | CISCO-PSM-MIB |
| 1.3.6.1.4.1.9.9.364.1 | ciscoPsmMIBObjects | CISCO-PSM-MIB |
| 1.3.6.1.4.1.9.9.364.1.1 | cpsmConfiguration | CISCO-PSM-MIB |
| 1.3.6.1.4.1.9.9.364.1.1.10 | cpsmFabricBindAutoLearnTable | CISCO-PSM-MIB |
| 1.3.6.1.4.1.9.9.364.1.1.10.1 | cpsmFabricBindAutoLearnEntry | CISCO-PSM-MIB |
| 1.3.6.1.4.1.9.9.364.1.1.10.1.3 | cpsmFabricBindAutoLearnEnable | CISCO-PSM-MIB |