All MIBs › CISCO-PNNI-MIB › ciscoPnniIfLinkSelection
ciscoPnniIfLinkSelection
Module: CISCO-PNNI-MIB
OID (symbolic): CISCO-PNNI-MIB::ciscoPnniIfLinkSelection
OID (numeric): 1.3.6.1.4.1.9.9.65.1.3.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: For CBR or VBR call setups, specifies a method for selecting one link out of multiple links with sufficient resources to the same neighbor node. Link selection applies whenever the port specified in the Designated Transit List (DTL) is zero and there are multiple interfaces to the next node. Valid values are: adminWeightMinimize - transmits call on the interface with the lowest administrative weight, blockingMinimize - Minimizes subsequent call blocking, transmitSpeedMaximize - Transmits call on highest speed parallel link, loadBalance - Balances calls across all parallel links.
When multiple parallel links are configured inconsistently, the order of precedence of configured values is `adminWeightMinimize', `blockingMinimize', `transmitSpeedMaximize', and then `loadBalance'; i.e., if any of the links is configured as adminWeightMinimize, that is used for the entire link group.
For Best Effort call setups (UBR or ABR), load balancing is always used.
What is ciscoPnniIfLinkSelection?
Configures which method the device uses to pick one link among several with sufficient resources to the same neighbor node when setting up a CBR or VBR call and the DTL port is unspecified.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.65.1.3.1.1.1 snmpwalk -v2c -c public <target> CISCO-PNNI-MIB::ciscoPnniIfLinkSelection
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.65.1.3.1.1.1.1 snmpget -v2c -c public <target> CISCO-PNNI-MIB::ciscoPnniIfLinkSelection.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.65.1.3.1.1.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ciscoPnniIfLinkSelection.1
Start monitoring Cisco ATM switch running PNNI (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-PNNI-MIB::ciscoPnniIfLinkSelection OID value, configure state conditions and alerts, and monitor any Cisco ATM switch running PNNI (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.65 | ciscoPnniMIB | CISCO-PNNI-MIB |
| 1.3.6.1.4.1.9.9.65.1 | ciscoPnniMIBObjects | CISCO-PNNI-MIB |
| 1.3.6.1.4.1.9.9.65.1.3 | ciscoPnniInterface | CISCO-PNNI-MIB |
| 1.3.6.1.4.1.9.9.65.1.3.1 | ciscoPnniIfTable | CISCO-PNNI-MIB |
| 1.3.6.1.4.1.9.9.65.1.3.1.1 | ciscoPnniIfEntry | CISCO-PNNI-MIB |
| 1.3.6.1.4.1.9.9.65.1.3.1.1.1 | ciscoPnniIfLinkSelection | CISCO-PNNI-MIB |