CISCO-PNNI-MIB :: ciscoPnniAdminWeightMode

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-PNNI-MIB › ciscoPnniAdminWeightMode

ciscoPnniAdminWeightMode

Module: CISCO-PNNI-MIB

OID (symbolic): CISCO-PNNI-MIB::ciscoPnniAdminWeightMode

OID (numeric): 1.3.6.1.4.1.9.9.65.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies the mode of default administrative weight assignment for PNNI interfaces. When this value is set to `uniform', by default the administrative weight of each PNNI interface is set to 5040, as defined in the ATM Forum PNNI 1.0 Specification. When this value is set to `linespeed', by default the administrative weight is set based on the linespeed or maximum cell rate of the interface.

In the absence of other constraints, the `uniform' mode causes PNNI routing to minimize the number of hops. Basing administrative weight on linespeed allows path selection to prefer paths along higher bandwidth interfaces.

What is ciscoPnniAdminWeightMode?

This read-write object selects how default administrative weights are assigned to PNNI interfaces; when set to 'uniform' every interface defaults to a weight of 5040 per the ATM Forum PNNI 1.0 specification.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.65.1.1.5
snmpwalk -v2c -c public <target> CISCO-PNNI-MIB::ciscoPnniAdminWeightMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.65.1.1.5.1
snmpget -v2c -c public <target> CISCO-PNNI-MIB::ciscoPnniAdminWeightMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.65.1.1.5.1 i <value>

Start monitoring Cisco ATM switch running PNNI (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-PNNI-MIB::ciscoPnniAdminWeightMode OID value, configure state conditions and alerts, and monitor any Cisco ATM switch running PNNI (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.65ciscoPnniMIBCISCO-PNNI-MIB
1.3.6.1.4.1.9.9.65.1ciscoPnniMIBObjectsCISCO-PNNI-MIB
1.3.6.1.4.1.9.9.65.1.1ciscoPnniBaseCISCO-PNNI-MIB
1.3.6.1.4.1.9.9.65.1.1.5ciscoPnniAdminWeightModeCISCO-PNNI-MIB