CISCO-PAGP-MIB :: pagpDistributionAlgorithm

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-PAGP-MIB › pagpDistributionAlgorithm

pagpDistributionAlgorithm

Module: CISCO-PAGP-MIB

OID (symbolic): CISCO-PAGP-MIB::pagpDistributionAlgorithm

OID (numeric): 1.3.6.1.4.1.9.9.98.1.2.1.1.5

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-only

Description: pagpDistributionAlgorithm describes, in human terms, the method used on this interface's agport to distribute outgoing data frames among its component interfaces. 'Source MAC address', 'Source and Destination MAC addresses', or 'IP flow: Source, Destination, protocol type' might be typical values for pagpDistributionAlgorithm. If the interface is not aggregated with an agport (pagpGroupIfIndex contains either 0 or the interface's own ifIndex), pagpDistributionAlgorithm may contain a DisplayString of length 0.

See the managed device's operation manual to determine the exact meaning of the information supplied in this variable. A device may implement more than one algorithm; selecting among those algorithms is not possible within this MIB.

The maximum length of this DisplayString is 255 octets.

What is pagpDistributionAlgorithm?

Reports the load-distribution algorithm that Port Aggregation Protocol (PAgP) uses to spread traffic across the ports bundled into an EtherChannel.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.98.1.2.1.1.5
snmpwalk -v2c -c public <target> CISCO-PAGP-MIB::pagpDistributionAlgorithm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.98.1.2.1.1.5.1
snmpget -v2c -c public <target> CISCO-PAGP-MIB::pagpDistributionAlgorithm.1

Start monitoring Cisco Catalyst switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-PAGP-MIB::pagpDistributionAlgorithm OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.98ciscoPagpMIBCISCO-PAGP-MIB
1.3.6.1.4.1.9.9.98.1ciscoPagpMIBObjectsCISCO-PAGP-MIB
1.3.6.1.4.1.9.9.98.1.2pagpProtocolCISCO-PAGP-MIB
1.3.6.1.4.1.9.9.98.1.2.1pagpProtocolConfigTableCISCO-PAGP-MIB
1.3.6.1.4.1.9.9.98.1.2.1.1pagpProtocolConfigEntryCISCO-PAGP-MIB
1.3.6.1.4.1.9.9.98.1.2.1.1.5pagpDistributionAlgorithmCISCO-PAGP-MIB