All MIBs › CISCO-OUTAGE-MONITOR-MIB › cOutageEventMonObjectIndex
cOutageEventMonObjectIndex
Module: CISCO-OUTAGE-MONITOR-MIB
OID (symbolic): CISCO-OUTAGE-MONITOR-MIB::cOutageEventMonObjectIndex
OID (numeric): 1.3.6.1.4.1.9.9.280.1.2.3.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object identifies a specific index of the monitored object based upon the cOutageEventObjectType. If it is interface(1), it correlates the object with ifIndex in ifTable in the IF-MIB. If it is physicalEntity(2), it correlates the object with entPhysicalIndex in entPhysicalTable in the ENTITY-MIB. If it is swProcess(3), the value corresponds to an entry in the cOutageCpmMapTable, which correlates the object with cpmCPUTotalIndex and cpmProcessPID in cpmProcessTable in the CISCO-PROCESS-MIB. If it is remoteObject(4), the value corresponds to an entry in the cOutageRemoteObjMapTable, which correlates the object with its ID and description. If it is logicalEntity(5), the value corresponds to an entry in the cOutageLogicalObjMapTable, which correlates the object with the description.
It also correlates the event entry with a specific entry in cOutageObjectTable.
What is cOutageEventMonObjectIndex?
Read-only index identifying the specific monitored object (e.g., an ifIndex for interfaces, or an equivalent index for other object types) associated with an outage event, based on its object type.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.280.1.2.3.1.3 snmpwalk -v2c -c public <target> CISCO-OUTAGE-MONITOR-MIB::cOutageEventMonObjectIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.280.1.2.3.1.3.1 snmpget -v2c -c public <target> CISCO-OUTAGE-MONITOR-MIB::cOutageEventMonObjectIndex.1
Start monitoring Cisco routing equipment (outage monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-OUTAGE-MONITOR-MIB::cOutageEventMonObjectIndex OID value, configure state conditions and alerts, and monitor any Cisco routing equipment (outage monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.280 | ciscoOutageMIB | CISCO-OUTAGE-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.280.1 | ciscoOutageMIBObjects | CISCO-OUTAGE-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.280.1.2 | cOutageHistory | CISCO-OUTAGE-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.280.1.2.3 | cOutageHistoryTable | CISCO-OUTAGE-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.280.1.2.3.1 | cOutageHistoryEntry | CISCO-OUTAGE-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.280.1.2.3.1.3 | cOutageEventMonObjectIndex | CISCO-OUTAGE-MONITOR-MIB |