All MIBs › CISCO-OTN-IF-MIB › coiIfControllerFECMode
coiIfControllerFECMode
Module: CISCO-OTN-IF-MIB
OID (symbolic): CISCO-OTN-IF-MIB::coiIfControllerFECMode
OID (numeric): 1.3.6.1.4.1.9.9.639.1.1.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object allows the management client to enable FEC ( Forward Error Correction ) on applicable interfaces.
FEC is a technique that improves digital channel quality through the addition of redundant data at the sending node. This redundant data is decoded at the receiver to detect and correct errors.
Valid values are 'disable' - disables FEC on the interface. 'enableStandard' - enables standard FEC on the interface (ITU-T G.975). 'enableEnhanced' - enables Default Enhanced FEC (ITU-T G.975 I.4/I.7) on the interface 'enableEnhancedI4' - enables ITU-T G.975 I.4 FEC Mode on the Interface 'enableEnhancedI7' - enables ITU-T G.975 I.7 FEC Mode on the Interface 'enableLongHaul' - enable proprietary long haul FEC on the Interface 'enableHighGain' - enable proprietary high gain FEC on the Interface 'enableEnhancedSD7' - enable FEC Software Decision 7% 'enableEnhancedSD20'- enable FEC Software Decision 20%.
What is coiIfControllerFECMode?
A read-write setting used to enable Forward Error Correction (FEC) on an interface, which adds redundant data to help detect and correct transmission errors.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.639.1.1.1.1.6 snmpwalk -v2c -c public <target> CISCO-OTN-IF-MIB::coiIfControllerFECMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.639.1.1.1.1.6.1 snmpget -v2c -c public <target> CISCO-OTN-IF-MIB::coiIfControllerFECMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.639.1.1.1.1.6.1 i <value>
Start monitoring Cisco DWDM/OTN optical transport platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-OTN-IF-MIB::coiIfControllerFECMode OID value, configure state conditions and alerts, and monitor any Cisco DWDM/OTN optical transport platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.639 | ciscoOtnIfMIB | CISCO-OTN-IF-MIB |
| 1.3.6.1.4.1.9.9.639.1 | ciscoOtnIfMIBObjects | CISCO-OTN-IF-MIB |
| 1.3.6.1.4.1.9.9.639.1.1 | coiDwdmInterface | CISCO-OTN-IF-MIB |
| 1.3.6.1.4.1.9.9.639.1.1.1 | coiIfControllerTable | CISCO-OTN-IF-MIB |
| 1.3.6.1.4.1.9.9.639.1.1.1.1 | coiIfControllerEntry | CISCO-OTN-IF-MIB |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.6 | coiIfControllerFECMode | CISCO-OTN-IF-MIB |