All MIBs › CISCO-OPTICAL-IF-EXTN-MIB › coIfXcvrLaserOperStatus
coIfXcvrLaserOperStatus
Module: CISCO-OPTICAL-IF-EXTN-MIB
OID (symbolic): CISCO-OPTICAL-IF-EXTN-MIB::coIfXcvrLaserOperStatus
OID (numeric): 1.3.6.1.4.1.9.10.66.1.4.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the current operational status of the laser on this interface.
'transmitting': The laser is on.
'degraded': The laser is on, but there is a fault that causes it to transmit in a degraded manner.
'down': The laser is shut down, either because of error conditions or because it has been administratively disabled. This state indicates that the laser is shut down due to conditions other than Laser Safety Control or Forward Laser Control.
'lscDown': The laser is shut down due to Laser Safety Control (LSC) mechanisms such as Automatic Laser Shutdown (ALS), i.e., due to a fault in the receive direction at this interface.
'flcDown': The laser is shut down due to Forward Laser Control, i.e., due to a fault on the cross-connected interface.
'unknown': The operational status of the laser cannot be determined.
If the value of coIfXcvrLaserAdminStatus is 'down', then this object also indicates 'down'. If coIfXcvrLaserAdminStatus is set to 'up', then the value of this object should change to 'transmitting' if the laser is functioning properly.
What is coIfXcvrLaserOperStatus?
Reports the current operational state of the interface's laser, such as transmitting normally, transmitting in a degraded mode due to a fault, or shut down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.66.1.4.1.1.2 snmpwalk -v2c -c public <target> CISCO-OPTICAL-IF-EXTN-MIB::coIfXcvrLaserOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.66.1.4.1.1.2.1 snmpget -v2c -c public <target> CISCO-OPTICAL-IF-EXTN-MIB::coIfXcvrLaserOperStatus.1
Start monitoring Cisco DWDM/optical-interface equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-OPTICAL-IF-EXTN-MIB::coIfXcvrLaserOperStatus OID value, configure state conditions and alerts, and monitor any Cisco DWDM/optical-interface equipment from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.66 | ciscoOpticalIfExtnMIB | CISCO-OPTICAL-IF-EXTN-MIB |
| 1.3.6.1.4.1.9.10.66.1 | coIfExtnMIBObjects | CISCO-OPTICAL-IF-EXTN-MIB |
| 1.3.6.1.4.1.9.10.66.1.4 | coIfXcvrGroup | CISCO-OPTICAL-IF-EXTN-MIB |
| 1.3.6.1.4.1.9.10.66.1.4.1 | coIfXcvrTable | CISCO-OPTICAL-IF-EXTN-MIB |
| 1.3.6.1.4.1.9.10.66.1.4.1.1 | coIfXcvrEntry | CISCO-OPTICAL-IF-EXTN-MIB |
| 1.3.6.1.4.1.9.10.66.1.4.1.1.2 | coIfXcvrLaserOperStatus | CISCO-OPTICAL-IF-EXTN-MIB |