CISCO-OPTICAL-IF-EXTN-MIB :: coIfDwdmChannelGroupBitmapLogic

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-OPTICAL-IF-EXTN-MIB › coIfDwdmChannelGroupBitmapLogic

coIfDwdmChannelGroupBitmapLogic

Module: CISCO-OPTICAL-IF-EXTN-MIB

OID (symbolic): CISCO-OPTICAL-IF-EXTN-MIB::coIfDwdmChannelGroupBitmapLogic

OID (numeric): 1.3.6.1.4.1.9.10.66.1.3.3.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object indicates whether coIfDwdmChannelGroupBitmap identifies channels included in the channel group, or whether it identifies channels excluded from the channel group.

When the value of this object is 'carried', then the channel group is composed only of those channels for which the value of the corresponding bit in coIfDwdmChannelBitmap is one.

When the value of this object is 'blocked', then the channel group is composed of all channels except those for which the value of the corresponding bit in coIfDwdmChannelBitmap is one. Channels that are not identified in coIfDwdmChannelBitmap are included in the channel group.

What is coIfDwdmChannelGroupBitmapLogic?

Determines whether the bits set in the DWDM channel group bitmap represent channels included in, or excluded from, the channel group.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.66.1.3.3.1.3
snmpwalk -v2c -c public <target> CISCO-OPTICAL-IF-EXTN-MIB::coIfDwdmChannelGroupBitmapLogic

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.66.1.3.3.1.3.1
snmpget -v2c -c public <target> CISCO-OPTICAL-IF-EXTN-MIB::coIfDwdmChannelGroupBitmapLogic.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.66.1.3.3.1.3.1 i <value>

Start monitoring Cisco DWDM/optical-interface equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-OPTICAL-IF-EXTN-MIB::coIfDwdmChannelGroupBitmapLogic OID value, configure state conditions and alerts, and monitor any Cisco DWDM/optical-interface equipment from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.66ciscoOpticalIfExtnMIBCISCO-OPTICAL-IF-EXTN-MIB
1.3.6.1.4.1.9.10.66.1coIfExtnMIBObjectsCISCO-OPTICAL-IF-EXTN-MIB
1.3.6.1.4.1.9.10.66.1.3coIfDwdmChannelGroupCISCO-OPTICAL-IF-EXTN-MIB
1.3.6.1.4.1.9.10.66.1.3.3coIfDwdmChannelGroupTableCISCO-OPTICAL-IF-EXTN-MIB
1.3.6.1.4.1.9.10.66.1.3.3.1coIfDwdmChannelGroupEntryCISCO-OPTICAL-IF-EXTN-MIB
1.3.6.1.4.1.9.10.66.1.3.3.1.3coIfDwdmChannelGroupBitmapLogicCISCO-OPTICAL-IF-EXTN-MIB