All MIBs › CISCO-NPORT-VIRTUALIZATION-MIB › cnpvTrafficAutoLoadbalance
cnpvTrafficAutoLoadbalance
Module: CISCO-NPORT-VIRTUALIZATION-MIB
OID (symbolic): CISCO-NPORT-VIRTUALIZATION-MIB::cnpvTrafficAutoLoadbalance
OID (numeric): 1.3.6.1.4.1.9.9.660.1.1.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object enables/disables automatic rebalancing of the server to external interface assignments such that number of server interface assigned to the external interfaces are evenly distributed as much as possible. Redistribution of the server interfaces are done with the constraints of VSANs assigned to the interfaces and traffic maps specifying which external interface a server interface can take.
When this feature is enabled or when an external interface comes up, then the switch reevaluates the current distribution and determines if a rebalancing is required.
During the move of server interface from one external interface to another, there is a temporary traffic disruption for that server interface.
What is cnpvTrafficAutoLoadbalance?
Enables or disables automatic rebalancing of server interface assignments across external interfaces so that server traffic load is distributed as evenly as possible.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.660.1.1.1.1 snmpwalk -v2c -c public <target> CISCO-NPORT-VIRTUALIZATION-MIB::cnpvTrafficAutoLoadbalance
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.660.1.1.1.1.1 snmpget -v2c -c public <target> CISCO-NPORT-VIRTUALIZATION-MIB::cnpvTrafficAutoLoadbalance.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.660.1.1.1.1.1 s <value>
Start monitoring Cisco MDS SAN switch (NPV/NPIV edge switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-NPORT-VIRTUALIZATION-MIB::cnpvTrafficAutoLoadbalance OID value, configure state conditions and alerts, and monitor any Cisco MDS SAN switch (NPV/NPIV edge switch) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.660 | ciscoNportVirtualizationMIB | CISCO-NPORT-VIRTUALIZATION-MIB |
| 1.3.6.1.4.1.9.9.660.1 | ciscoNportVirtualizationMIBObjects | CISCO-NPORT-VIRTUALIZATION-MIB |
| 1.3.6.1.4.1.9.9.660.1.1 | cnpvConfiguration | CISCO-NPORT-VIRTUALIZATION-MIB |
| 1.3.6.1.4.1.9.9.660.1.1.1 | cnpvGlobal | CISCO-NPORT-VIRTUALIZATION-MIB |
| 1.3.6.1.4.1.9.9.660.1.1.1.1 | cnpvTrafficAutoLoadbalance | CISCO-NPORT-VIRTUALIZATION-MIB |