All MIBs › CISCO-NOTIFICATION-CONTROL-MIB › cNotifCtrlCurrentState
cNotifCtrlCurrentState
Module: CISCO-NOTIFICATION-CONTROL-MIB
OID (symbolic): CISCO-NOTIFICATION-CONTROL-MIB::cNotifCtrlCurrentState
OID (numeric): 1.3.6.1.4.1.9.9.586.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object represents the current state of notification control. The semantics are as follows.
controlOn - This indicates that notifications configured in cNotifCtrlTable are currently getting filtered on the system. This object will always be 'controlOn', when cNotifCtrlMode is 'forcedControl'.
controlOff - This indicates that notifications configured in cNotifCtrlTable are currently not being filtered on the system. This object will always be 'controlOff', when cNotifCtrlMode is 'noControl'.
If cNotifCtrlMode is set to 'automaticControl', the agent sets this object to 'controlOn', when number of notifications generated by the system exceeds the value represented by cNotifCtrlThreshold in the time interval represented by cNotifCtrlSamplingInterval. The agent sets this object to 'controlOff', when the number of notifications generated by the system falls below the value represented by cNotifCtrlThreshold in the time interval represented by cNotifCtrlSamplingInterval.
What is cNotifCtrlCurrentState?
Indicates whether notification filtering is currently active (on) or not (off) on the system, reflecting the real-time result of the configured control mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.586.1.1.2 snmpwalk -v2c -c public <target> CISCO-NOTIFICATION-CONTROL-MIB::cNotifCtrlCurrentState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.586.1.1.2.1 snmpget -v2c -c public <target> CISCO-NOTIFICATION-CONTROL-MIB::cNotifCtrlCurrentState.1
Start monitoring Cisco routers and switches (notification rate control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-NOTIFICATION-CONTROL-MIB::cNotifCtrlCurrentState OID value, configure state conditions and alerts, and monitor any Cisco routers and switches (notification rate control) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.586 | ciscoNotificationControlMIB | CISCO-NOTIFICATION-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.586.1 | cNotifCtrlMIBObjects | CISCO-NOTIFICATION-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.586.1.1 | cNotifCtrlConfig | CISCO-NOTIFICATION-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.586.1.1.2 | cNotifCtrlCurrentState | CISCO-NOTIFICATION-CONTROL-MIB |