All MIBs › CISCO-NBAR-PROTOCOL-DISCOVERY-MIB › cnpdThresholdConfigFalling
cnpdThresholdConfigFalling
Module: CISCO-NBAR-PROTOCOL-DISCOVERY-MIB
OID (symbolic): CISCO-NBAR-PROTOCOL-DISCOVERY-MIB::cnpdThresholdConfigFalling
OID (numeric): 1.3.6.1.4.1.9.9.244.1.5.1.1.10
Node type: OBJECT-TYPE
Type: Gauge
Access: read-write
Description: This is the threshold object which the management station sets to determine if it gets breached. It indicates the statistic being sampled was falling.
When current sample is less than or equal to this object, and the value at the last sampling interval was greater than this object (in other words the value is falling), an entry in the cnpdThresholdHistoryTable will be created.
After a falling event is generated, another such event will not be generated until the sampled value rises above this object and reaches the cnpdThresholdConfigRising value.
What is cnpdThresholdConfigFalling?
A writable falling-threshold value; a notification is triggered when the sampled statistic drops to or below this value after previously being above it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.244.1.5.1.1.10 snmpwalk -v2c -c public <target> CISCO-NBAR-PROTOCOL-DISCOVERY-MIB::cnpdThresholdConfigFalling
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.244.1.5.1.1.10.1 snmpget -v2c -c public <target> CISCO-NBAR-PROTOCOL-DISCOVERY-MIB::cnpdThresholdConfigFalling.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.244.1.5.1.1.10.1 i <value>
Start monitoring Cisco router/switch with NBAR support with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-NBAR-PROTOCOL-DISCOVERY-MIB::cnpdThresholdConfigFalling OID value, configure state conditions and alerts, and monitor any Cisco router/switch with NBAR support from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.244 | ciscoNbarProtocolDiscoveryMIB | CISCO-NBAR-PROTOCOL-DISCOVERY-MIB |
| 1.3.6.1.4.1.9.9.244.1 | cnpdMIBObjects | CISCO-NBAR-PROTOCOL-DISCOVERY-MIB |
| 1.3.6.1.4.1.9.9.244.1.5 | cnpdThresholdConfig | CISCO-NBAR-PROTOCOL-DISCOVERY-MIB |
| 1.3.6.1.4.1.9.9.244.1.5.1 | cnpdThresholdConfigTable | CISCO-NBAR-PROTOCOL-DISCOVERY-MIB |
| 1.3.6.1.4.1.9.9.244.1.5.1.1 | cnpdThresholdConfigEntry | CISCO-NBAR-PROTOCOL-DISCOVERY-MIB |
| 1.3.6.1.4.1.9.9.244.1.5.1.1.10 | cnpdThresholdConfigFalling | CISCO-NBAR-PROTOCOL-DISCOVERY-MIB |