CISCO-MMAIL-DIAL-CONTROL-MIB :: cmmIpPeerCfgSessionTarget

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-MMAIL-DIAL-CONTROL-MIB › cmmIpPeerCfgSessionTarget

cmmIpPeerCfgSessionTarget

Module: CISCO-MMAIL-DIAL-CONTROL-MIB

OID (symbolic): CISCO-MMAIL-DIAL-CONTROL-MIB::cmmIpPeerCfgSessionTarget

OID (numeric): 1.3.6.1.4.1.9.9.102.1.1.1.1.2

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: The object specifies the session target of the peer. Session Targets definitions: The session target has the syntax used by the IETF service location protocol. The syntax is as follows:

mapping-type:type-specific-syntax

The mapping-type specifies a scheme for mapping the matching dial string to a session target. The type-specific-syntax is exactly that, something that the particular mapping scheme can understand. For example, Session target mailto:+$d$@fax.cisco.com

The valid Mapping type definitions for the peer are as follows: mailto - Syntax: mailto:w@x.y.z

What is cmmIpPeerCfgSessionTarget?

Configures the session target (destination, expressed in IETF service location protocol syntax) for the media mail dial peer, identifying where mail sessions should be directed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.102.1.1.1.1.2
snmpwalk -v2c -c public <target> CISCO-MMAIL-DIAL-CONTROL-MIB::cmmIpPeerCfgSessionTarget

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.102.1.1.1.1.2.1
snmpget -v2c -c public <target> CISCO-MMAIL-DIAL-CONTROL-MIB::cmmIpPeerCfgSessionTarget.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.102.1.1.1.1.2.1 s <value>

Start monitoring Cisco voice/fax gateway router (unified messaging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MMAIL-DIAL-CONTROL-MIB::cmmIpPeerCfgSessionTarget OID value, configure state conditions and alerts, and monitor any Cisco voice/fax gateway router (unified messaging) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.102ciscoMediaMailDialControlMIBCISCO-MMAIL-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.102.1cmmdcMIBObjectsCISCO-MMAIL-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.102.1.1cmmPeerCISCO-MMAIL-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.102.1.1.1cmmIpPeerCfgTableCISCO-MMAIL-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.102.1.1.1.1cmmIpPeerCfgEntryCISCO-MMAIL-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.9.102.1.1.1.1.2cmmIpPeerCfgSessionTargetCISCO-MMAIL-DIAL-CONTROL-MIB