All MIBs › CISCO-LWAPP-WLAN-SECURITY-MIB › cLWSecDot11EssCkipKey
cLWSecDot11EssCkipKey
Module: CISCO-LWAPP-WLAN-SECURITY-MIB
OID (symbolic): CISCO-LWAPP-WLAN-SECURITY-MIB::cLWSecDot11EssCkipKey
OID (numeric): 1.3.6.1.4.1.9.9.521.1.1.2.1.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: This object specifies the CKIP key that is applicable only when cLWSecDot11EssCkipSecurity is set as 'true'.
The number of characters to be configured depends on the key length and the key type configured through the objects cLWSecDot11EssCkipKeyLength and cLWSecDot11EssCkipKeyFmt respectively.
The combinations are as follows.
Key Type Number of characters
hex 10/26 hex characters for 40/104 bits ascii 5/13 ascii characters for 40/104 bits.
When cLWSecDot11EssCkipKeyFmt is set to 'hex', cLWSecDot11EssCkipKey can only be set to hexadecimal characters.
To ensure consistency the following objects must be set together. cLWSecDot11EssCkipKeyFmt cLWSecDot11EssCkipKeyIndex cLWSecDot11EssCkipKeyLength cLWSecDot11EssCkipKey.
What is cLWSecDot11EssCkipKey?
Holds the actual CKIP encryption key configured for this WLAN, applicable only when CKIP security is enabled; the required number of characters depends on the configured key length and format.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.521.1.1.2.1.5 snmpwalk -v2c -c public <target> CISCO-LWAPP-WLAN-SECURITY-MIB::cLWSecDot11EssCkipKey
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.521.1.1.2.1.5.1 snmpget -v2c -c public <target> CISCO-LWAPP-WLAN-SECURITY-MIB::cLWSecDot11EssCkipKey.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.521.1.1.2.1.5.1 s <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-WLAN-SECURITY-MIB::cLWSecDot11EssCkipKey OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.521 | ciscoLwappWlanSecurityMIB | CISCO-LWAPP-WLAN-SECURITY-MIB |
| 1.3.6.1.4.1.9.9.521.1 | ciscoLwappWlanSecurityMIBObjects | CISCO-LWAPP-WLAN-SECURITY-MIB |
| 1.3.6.1.4.1.9.9.521.1.1 | clwsCckmConfig | CISCO-LWAPP-WLAN-SECURITY-MIB |
| 1.3.6.1.4.1.9.9.521.1.1.2 | cLWSecDot11EssCkipTable | CISCO-LWAPP-WLAN-SECURITY-MIB |
| 1.3.6.1.4.1.9.9.521.1.1.2.1 | cLWSecDot11EssCkipEntry | CISCO-LWAPP-WLAN-SECURITY-MIB |
| 1.3.6.1.4.1.9.9.521.1.1.2.1.5 | cLWSecDot11EssCkipKey | CISCO-LWAPP-WLAN-SECURITY-MIB |