CISCO-LWAPP-WLAN-SECURITY-MIB :: cLWSecAaaRadiusAuthCallStationIdType

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-LWAPP-WLAN-SECURITY-MIB › cLWSecAaaRadiusAuthCallStationIdType

cLWSecAaaRadiusAuthCallStationIdType

Module: CISCO-LWAPP-WLAN-SECURITY-MIB

OID (symbolic): CISCO-LWAPP-WLAN-SECURITY-MIB::cLWSecAaaRadiusAuthCallStationIdType

OID (numeric): 1.3.6.1.4.1.9.9.521.1.4.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object specifies the call station ID information sent in RADIUS authentication messages. ipAddr(1)- Sets Call Station Id Type to the system's IP Address. macAddr(2)- Sets Call Station Id Type to the system's MAC Address. apMacAddress(3)- Sets Call Station Id Type to the AP's Radio MAC Address. apMacAddressSsid(4)- Sets Call Station Id Type to the format :. apNameSsid(5)- Sets Called Station Id to the format :. apName(6)- Sets Called Station Id to the AP Name. apGroupName(7)- Sets Called Station Id to the AP Group Name. apLocation(8)- Sets Called Station Id to the AP Location. apVlanId(9)- Sets Called Station Id to the VLAN id. apMacEthAddress(10)- Sets Called Station Id Type to the AP's Ethernet MAC address. apMacEthAddressSsid(11)- Sets Called Station Id Type to the format :. apLabelAddress(12)- Sets Call Station Id Type to the AP MAC address printed on APLabel. apLabelAddressSsid(13)- Sets Call Station Id Type to the format :.

What is cLWSecAaaRadiusAuthCallStationIdType?

This read-write object configures which client identifier (e.g. system IP address, system MAC address, or AP MAC address) is sent as the Call Station ID in RADIUS authentication messages for the wireless LAN.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.521.1.4.1
snmpwalk -v2c -c public <target> CISCO-LWAPP-WLAN-SECURITY-MIB::cLWSecAaaRadiusAuthCallStationIdType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.521.1.4.1.1
snmpget -v2c -c public <target> CISCO-LWAPP-WLAN-SECURITY-MIB::cLWSecAaaRadiusAuthCallStationIdType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.521.1.4.1.1 i <value>

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-WLAN-SECURITY-MIB::cLWSecAaaRadiusAuthCallStationIdType OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.521ciscoLwappWlanSecurityMIBCISCO-LWAPP-WLAN-SECURITY-MIB
1.3.6.1.4.1.9.9.521.1ciscoLwappWlanSecurityMIBObjectsCISCO-LWAPP-WLAN-SECURITY-MIB
1.3.6.1.4.1.9.9.521.1.4clwsAaaConfigCISCO-LWAPP-WLAN-SECURITY-MIB
1.3.6.1.4.1.9.9.521.1.4.1cLWSecAaaRadiusAuthCallStationIdTypeCISCO-LWAPP-WLAN-SECURITY-MIB

Module

This MIB depends on