All MIBs › CISCO-LWAPP-SI-MIB › ciscoLwappSiAqLowSeverityHigh

ciscoLwappSiAqLowSeverityHigh

OID (symbolic): CISCO-LWAPP-SI-MIB::ciscoLwappSiAqLowSeverityHigh

OID (numeric): 1.3.6.1.4.1.9.9.513.1.6.1.0.5

Node type: NOTIFICATION-TYPE

Description: This notification is generated when the air quality index of an APfalls below a specified threshold value indicated by cLSiD11AqiTrapThreshold or severity value goes above the threshold indicated by cLSiD11IdrUnclassifiedCurrentSevIndex.

cLApSysMacAddress - MAC address of the access point. cLApDot11IfSlotId - radio interface slot. cLSiAqChannelNumber - channel number. cLSiAqIndex - air quality index. cLSiD11AqiTrapThreshold - threshol value of air quality considered for generation of trap. cLSiD11IdrUnclassifiedTrapThreshold - severity threshold for unclassified interference category. cLSiAlarmClear - a truth value showing if event was raised or cleared. ciscoLwappSiAqLowSeverityHigh object is superseded by ciscoLwappSiAqLowSeverityHighRev1.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' CISCO-LWAPP-SI-MIB::ciscoLwappSiAqLowSeverityHigh
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.9.9.513.1.6.1.0.5

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:65065->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (19492905) 2 days, 6:08:49.05
  SNMPv2-MIB::snmpTrapOID.0 = OID: CISCO-LWAPP-SI-MIB::ciscoLwappSiAqLowSeverityHigh

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-SI-MIB::ciscoLwappSiAqLowSeverityHigh OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.9	cisco	CAT2600-MIB
1.3.6.1.4.1.9.9	ciscoMgmt	CISCO-SMI
1.3.6.1.4.1.9.9.513	ciscoLwappApMIB	CISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1	ciscoLwappApMIBObjects	CISCO-LWAPP-AP-MIB
1.3.6.1.4.1.9.9.513.1.6	ciscoLwappSpectrum	CISCO-LWAPP-AP-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.9.9.513.1.6.1	ciscoLwappSiMIB	CISCO-LWAPP-SI-MIB
1.3.6.1.4.1.9.9.513.1.6.1.0	ciscoLwappSiMIBNotifs	CISCO-LWAPP-SI-MIB
1.3.6.1.4.1.9.9.513.1.6.1.0.5	ciscoLwappSiAqLowSeverityHigh	CISCO-LWAPP-SI-MIB

CISCO-LWAPP-SI-MIB :: ciscoLwappSiAqLowSeverityHigh

ciscoLwappSiAqLowSeverityHigh

Module

This MIB depends on