CISCO-LWAPP-RF-MIB :: cLRFProfileRxSopThresholdCustom

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-LWAPP-RF-MIBcLRFProfileRxSopThresholdCustom

cLRFProfileRxSopThresholdCustom

Module: CISCO-LWAPP-RF-MIB

OID (symbolic): CISCO-LWAPP-RF-MIB::cLRFProfileRxSopThresholdCustom

OID (numeric): 1.3.6.1.4.1.9.9.778.1.1.2.1.55

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This object specifies the percentage for the receiver start of packet custom threshold for the client access node.

What is cLRFProfileRxSopThresholdCustom?

This read-write object sets a custom receiver Start-of-Packet (RX-SOP) threshold percentage for the client access node, used to control AP sensitivity to incoming signals.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.778.1.1.2.1.55
snmpwalk -v2c -c public <target> CISCO-LWAPP-RF-MIB::cLRFProfileRxSopThresholdCustom

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.778.1.1.2.1.55.1
snmpget -v2c -c public <target> CISCO-LWAPP-RF-MIB::cLRFProfileRxSopThresholdCustom.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.778.1.1.2.1.55.1 i <value>

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-RF-MIB::cLRFProfileRxSopThresholdCustom OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.778ciscoLwappRFMIBCISCO-LWAPP-RF-MIB
1.3.6.1.4.1.9.9.778.1ciscoLwappRFMIBObjectsCISCO-LWAPP-RF-MIB
1.3.6.1.4.1.9.9.778.1.1ciscoLwappRFConfigCISCO-LWAPP-RF-MIB
1.3.6.1.4.1.9.9.778.1.1.2cLRFProfileTableCISCO-LWAPP-RF-MIB
1.3.6.1.4.1.9.9.778.1.1.2.1cLRFProfileEntryCISCO-LWAPP-RF-MIB
1.3.6.1.4.1.9.9.778.1.1.2.1.55cLRFProfileRxSopThresholdCustomCISCO-LWAPP-RF-MIB