All MIBs › CISCO-LWAPP-DOT11-MIB › cldLoadBalancingWindowSize
cldLoadBalancingWindowSize
Module: CISCO-LWAPP-DOT11-MIB
OID (symbolic): CISCO-LWAPP-DOT11-MIB::cldLoadBalancingWindowSize
OID (numeric): 1.3.6.1.4.1.9.9.612.1.1.8.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object specifies the threshold for the difference between number of mobile station a given AP can have and mobile station count of the AP having minimum number of mobile station in the setup.
For example, suppose in a network setup there are three APs are connected to Controller, say AP1, AP2 and AP3. AP1 have 2 mobile stations, AP2 have 3 and AP3 have 4 mobile stations. Here AP1 have minimum number of mobile stations i.e. 2. Suppose window size is configured as 2. So every AP can have 2+2=4 mobile stations. So every 5th mobile station will be load balanced.
So, if any mobile station tries to join AP3, denial will be sent from AP3. For a mobile station denial will be send only for cldLoadBalancingDenialCount number of time.
What is cldLoadBalancingWindowSize?
Configures the client-count difference threshold used for wireless load balancing, defining how many more clients an access point may have compared to the least-loaded AP before it is considered overloaded.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.8.2 snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldLoadBalancingWindowSize
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.8.2.1 snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldLoadBalancingWindowSize.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.612.1.1.8.2.1 i <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-MIB::cldLoadBalancingWindowSize OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.612 | ciscoLwappDot11MIB | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1 | ciscoLwappDot11MIBObjects | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1 | cldConfig | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1.8 | cldLoadBalancing | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1.8.2 | cldLoadBalancingWindowSize | CISCO-LWAPP-DOT11-MIB |