CISCO-LWAPP-DOT11-MIB :: cldLoadBalancingTrafficThreshold

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-LWAPP-DOT11-MIBcldLoadBalancingTrafficThreshold

cldLoadBalancingTrafficThreshold

Module: CISCO-LWAPP-DOT11-MIB

OID (symbolic): CISCO-LWAPP-DOT11-MIB::cldLoadBalancingTrafficThreshold

OID (numeric): 1.3.6.1.4.1.9.9.612.1.1.8.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object specifies the traffic threshold that triggers 'uplinkUsage' based load balancing. When the uplink usage of an AP is above this threshold, this AP is valid for 'uplinkUsage' based load balancing, if load balance is enabled by cLWlanLoadBalancingEnable and 'uplinkUsage' mode is chosen by cLWlanLoadBalancingMode at that WLAN.

What is cldLoadBalancingTrafficThreshold?

Defines the uplink traffic usage threshold above which an access point becomes eligible for uplink-usage-based load balancing (when load balancing is enabled).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.8.4
snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldLoadBalancingTrafficThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.8.4.1
snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldLoadBalancingTrafficThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.612.1.1.8.4.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cldLoadBalancingTrafficThreshold.1

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-MIB::cldLoadBalancingTrafficThreshold OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.612ciscoLwappDot11MIBCISCO-LWAPP-DOT11-MIB
1.3.6.1.4.1.9.9.612.1ciscoLwappDot11MIBObjectsCISCO-LWAPP-DOT11-MIB
1.3.6.1.4.1.9.9.612.1.1cldConfigCISCO-LWAPP-DOT11-MIB
1.3.6.1.4.1.9.9.612.1.1.8cldLoadBalancingCISCO-LWAPP-DOT11-MIB
1.3.6.1.4.1.9.9.612.1.1.8.4cldLoadBalancingTrafficThresholdCISCO-LWAPP-DOT11-MIB