All MIBs › CISCO-LWAPP-DOT11-MIB › cldLoadBalancingEnable
cldLoadBalancingEnable
Module: CISCO-LWAPP-DOT11-MIB
OID (symbolic): CISCO-LWAPP-DOT11-MIB::cldLoadBalancingEnable
OID (numeric): 1.3.6.1.4.1.9.9.612.1.1.8.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object specifies the mode of Load Balancing. Value of 1(enable) shows that the Load Balancing is enabled and value of 2(disable) shows that it is disabled.
If Load balancing is enable and wireless mobile station tries to associate any overloaded AP, association rejection will be sent to mobile station from AP.
From 7.0 release onwards Load Balancing cannot be configured globally. cldLoadBalancingEnable will be read-only attribute and it will always be enable. Use cLWlanLoadBalancingEnable to configure it per WLAN.
What is cldLoadBalancingEnable?
Read-only status indicating whether client load balancing is enabled (1) or disabled (2) on the controller; when enabled, wireless clients trying to join an overloaded access point may be steered elsewhere.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.8.1 snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldLoadBalancingEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.8.1.1 snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldLoadBalancingEnable.1
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-MIB::cldLoadBalancingEnable OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.612 | ciscoLwappDot11MIB | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1 | ciscoLwappDot11MIBObjects | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1 | cldConfig | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1.8 | cldLoadBalancing | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1.8.1 | cldLoadBalancingEnable | CISCO-LWAPP-DOT11-MIB |