All MIBs › CISCO-LWAPP-DOT11-MIB › cldLoadBalancingDenialCount
cldLoadBalancingDenialCount
Module: CISCO-LWAPP-DOT11-MIB
OID (symbolic): CISCO-LWAPP-DOT11-MIB::cldLoadBalancingDenialCount
OID (numeric): 1.3.6.1.4.1.9.9.612.1.1.8.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object specifies maximum number of association rejection AP will send to a mobile station for a given sequence of association.
When a mobile station tries to associate on wireless network, it sends association request to AP. If AP is overloaded and load balancing is enable on controller, AP will send a denial to association request. If there are no other AP in the vicinity of mobile station, it will try to associate same AP again. So to restrict the number of denial sent from AP, cldLoadBalancingDenialCount is defined. After maximum denial count is reached mobile station will be able to associate.
Association attempts on an AP from any mobile station before associating any AP is called as sequence of assoociation.
What is cldLoadBalancingDenialCount?
Sets the maximum number of association request rejections an overloaded access point will send to a mobile station before allowing it to associate, as part of wireless load balancing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.8.3 snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldLoadBalancingDenialCount
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.8.3.1 snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldLoadBalancingDenialCount.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.612.1.1.8.3.1 i <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-MIB::cldLoadBalancingDenialCount OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.612 | ciscoLwappDot11MIB | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1 | ciscoLwappDot11MIBObjects | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1 | cldConfig | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1.8 | cldLoadBalancing | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1.8.3 | cldLoadBalancingDenialCount | CISCO-LWAPP-DOT11-MIB |