CISCO-LWAPP-DOT11-MIB :: cldDot11aNdpMode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-LWAPP-DOT11-MIBcldDot11aNdpMode

cldDot11aNdpMode

Module: CISCO-LWAPP-DOT11-MIB

OID (symbolic): CISCO-LWAPP-DOT11-MIB::cldDot11aNdpMode

OID (numeric): 1.3.6.1.4.1.9.9.612.1.1.21.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute is used to configure neighbor discovery mode for 802.11a radios.

What is cldDot11aNdpMode?

Read-write setting that configures the neighbor discovery protocol mode used by 802.11a radios.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.21.2
snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldDot11aNdpMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.21.2.1
snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldDot11aNdpMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.612.1.1.21.2.1 i <value>

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-MIB::cldDot11aNdpMode OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.612ciscoLwappDot11MIBCISCO-LWAPP-DOT11-MIB
1.3.6.1.4.1.9.9.612.1ciscoLwappDot11MIBObjectsCISCO-LWAPP-DOT11-MIB
1.3.6.1.4.1.9.9.612.1.1cldConfigCISCO-LWAPP-DOT11-MIB
1.3.6.1.4.1.9.9.612.1.1.21cldDot11NdpModeCISCO-LWAPP-DOT11-MIB
1.3.6.1.4.1.9.9.612.1.1.21.2cldDot11aNdpModeCISCO-LWAPP-DOT11-MIB