All MIBs › CISCO-LWAPP-DOT11-MIB › cldDot116GHzRTSThreshold
cldDot116GHzRTSThreshold
Module: CISCO-LWAPP-DOT11-MIB
OID (symbolic): CISCO-LWAPP-DOT11-MIB::cldDot116GHzRTSThreshold
OID (numeric): 1.3.6.1.4.1.9.9.612.1.1.22.7
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This attribute for 6GHz band shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake shall be performed at the beginning of any frame exchange sequence where the MPDU is of type Data or Management, the MPDU has an individual address in the Address1 field, and the length of the MPDU is greater than this threshold. (For additional details, refer to Table 21 in 9.7.) Setting this attribute to be larger than the maximum MSDU size shall have the effect of turning off the RTS/CTS handshake for frames of Data or Management type transmitted by this STA. Setting this attribute to zero shall have the effect of turning on the RTS/CTS handshake for all frames of Data or Management type transmitted by this STA. The default value of this attribute shall be 2347.
What is cldDot116GHzRTSThreshold?
Shows the frame size threshold, in octets, below which an RTS/CTS handshake is skipped for data and management frames on the 6GHz band.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.22.7 snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldDot116GHzRTSThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.22.7.1 snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldDot116GHzRTSThreshold.1
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-MIB::cldDot116GHzRTSThreshold OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.612 | ciscoLwappDot11MIB | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1 | ciscoLwappDot11MIBObjects | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1 | cldConfig | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1.22 | cldDot116GHzPhy | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1.22.7 | cldDot116GHzRTSThreshold | CISCO-LWAPP-DOT11-MIB |