All MIBs › CISCO-LWAPP-DOT11-MIB › cldDot116GHzCurrentTxPowerLevel
cldDot116GHzCurrentTxPowerLevel
Module: CISCO-LWAPP-DOT11-MIB
OID (symbolic): CISCO-LWAPP-DOT11-MIB::cldDot116GHzCurrentTxPowerLevel
OID (numeric): 1.3.6.1.4.1.9.9.612.1.1.23.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This attribute for 6GHz band represents the TxPowerLevel N that is is currently being used to transmit data. Some PHYs also use this value to determine the receiver sensitivity requirements for CCA.
What is cldDot116GHzCurrentTxPowerLevel?
Reports the transmit power level currently in use for data transmission on the 6GHz radio band.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.23.8 snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldDot116GHzCurrentTxPowerLevel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.23.8.1 snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldDot116GHzCurrentTxPowerLevel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.612.1.1.23.8.1 i <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-MIB::cldDot116GHzCurrentTxPowerLevel OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.612 | ciscoLwappDot11MIB | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1 | ciscoLwappDot11MIBObjects | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1 | cldConfig | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1.23 | cldDot116GHzGlobalConfig | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1.23.8 | cldDot116GHzCurrentTxPowerLevel | CISCO-LWAPP-DOT11-MIB |