All MIBs › CISCO-LWAPP-DOT11-MIB › cldDot116GHzBeaconPeriod
cldDot116GHzBeaconPeriod
Module: CISCO-LWAPP-DOT11-MIB
OID (symbolic): CISCO-LWAPP-DOT11-MIB::cldDot116GHzBeaconPeriod
OID (numeric): 1.3.6.1.4.1.9.9.612.1.1.23.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute for 6GHz band shall specify the number of TU that a AP Radio shall use for scheduling Beacon tranmissions. This value is transmitted in Beacon and Probe Response frames.
What is cldDot116GHzBeaconPeriod?
Configures the interval, in time units, between Beacon frame transmissions by an AP radio on the 6GHz band, as advertised in Beacon and Probe Response frames.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.23.2 snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldDot116GHzBeaconPeriod
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.23.2.1 snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldDot116GHzBeaconPeriod.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.612.1.1.23.2.1 i <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-MIB::cldDot116GHzBeaconPeriod OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.612 | ciscoLwappDot11MIB | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1 | ciscoLwappDot11MIBObjects | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1 | cldConfig | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1.23 | cldDot116GHzGlobalConfig | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1.23.2 | cldDot116GHzBeaconPeriod | CISCO-LWAPP-DOT11-MIB |