All MIBs › CISCO-LWAPP-DOT11-MIB › cldBandSelectCycleThreshold
cldBandSelectCycleThreshold
Module: CISCO-LWAPP-DOT11-MIB
OID (symbolic): CISCO-LWAPP-DOT11-MIB::cldBandSelectCycleThreshold
OID (numeric): 1.3.6.1.4.1.9.9.612.1.1.9.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object specifies time threshold for a new scanning mobile station period. Mobile station cycle counter will increment only if mobile station scans same channel any time after cldBandSelectCycleThreshold is passed.
For example, if a mobile station is scanning a channel after every 150 milliseconds and cycle threshold value is configures as 200, then cycle count will be incremented after 300 seconds. But if mobile station is scanning after every 250 milliseconds, then mobile station count will be incremented after 250 milliseconds.
What is cldBandSelectCycleThreshold?
Sets the time interval that must pass before a repeated probe scan on the same channel by a mobile station is counted as a new cycle in Band Select's suppression logic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.9.3 snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldBandSelectCycleThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.9.3.1 snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldBandSelectCycleThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.612.1.1.9.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cldBandSelectCycleThreshold.1
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-MIB::cldBandSelectCycleThreshold OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.612 | ciscoLwappDot11MIB | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1 | ciscoLwappDot11MIBObjects | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1 | cldConfig | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1.9 | cldBandSelect | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1.9.3 | cldBandSelectCycleThreshold | CISCO-LWAPP-DOT11-MIB |