All MIBs › CISCO-LWAPP-DOT11-MIB › cldBandSelectClientRssi
cldBandSelectClientRssi
Module: CISCO-LWAPP-DOT11-MIB
OID (symbolic): CISCO-LWAPP-DOT11-MIB::cldBandSelectClientRssi
OID (numeric): 1.3.6.1.4.1.9.9.612.1.1.9.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object specifies minimum mobile station RSSI threshold. Mobile stations having RSSI below this value will not be recorded in suppressed table. This configuration filter out far away mobile stations with low signal strength. This will limit the number of mobile stations on the table to a reasonable amount.
What is cldBandSelectClientRssi?
Sets the minimum RSSI (signal strength) threshold a mobile station must meet to be recorded in the Band Select suppression table, filtering out weak/far-away clients.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.9.6 snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldBandSelectClientRssi
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.612.1.1.9.6.1 snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-MIB::cldBandSelectClientRssi.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.612.1.1.9.6.1 i <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-MIB::cldBandSelectClientRssi OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.612 | ciscoLwappDot11MIB | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1 | ciscoLwappDot11MIBObjects | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1 | cldConfig | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1.9 | cldBandSelect | CISCO-LWAPP-DOT11-MIB |
| 1.3.6.1.4.1.9.9.612.1.1.9.6 | cldBandSelectClientRssi | CISCO-LWAPP-DOT11-MIB |