All MIBs › CISCO-LWAPP-CLIENT-ROAMING-MIB › clcrRoamReason
clcrRoamReason
Module: CISCO-LWAPP-CLIENT-ROAMING-MIB
OID (symbolic): CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrRoamReason
OID (numeric): 1.3.6.1.4.1.9.9.523.1.3.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the reason for a client to roam to a new AP.
The semantics are as follows.
clcrUnspecified - The reason is not known or can't be found.
clcrPoorLink - Normal roam due to poor link (excessive retries, too much interference, RSSI too low, etc.)
clcrLoadBalancing - Normal roam due to load balancing
clcrInsufficientCapacity - Roaming occured due to the insufficient capacity on the previous AP (TSPEC rejected)
clcrDirectedRoam - Roaming is directed by the 802.11 wireless Infrastructure
clcrFirstAssociation - This is the first association to a particular WLAN
clcrRoamingIn - Roaming in from cellular or other WAN
clcrRoamingOut - Roaming out to cellular or other WAN
clcrBetterAp - Normal roam due to better AP found
clcrDisassociated - Deauthenticated or Disassociated from the previous AP.
What is clcrRoamReason?
Indicates why a wireless client roamed to a new access point, such as due to a poor link (excessive retries, interference, or low signal strength) or other conditions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.523.1.3.1.1.8 snmpwalk -v2c -c public <target> CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrRoamReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.523.1.3.1.1.8.1 snmpget -v2c -c public <target> CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrRoamReason.1
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrRoamReason OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.523 | ciscoLwappClRoamMIB | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1 | ciscoLwappClRoamMIBObjects | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1.3 | clcrRoamReasonReport | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1.3.1 | clcrRoamReasonReportTable | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1.3.1.1 | clcrRoamReasonReportEntry | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1.3.1.1.8 | clcrRoamReason | CISCO-LWAPP-CLIENT-ROAMING-MIB |