All MIBs › CISCO-LWAPP-CLIENT-ROAMING-MIB › clcrDot11bHysteresisV2
clcrDot11bHysteresisV2
Module: CISCO-LWAPP-CLIENT-ROAMING-MIB
OID (symbolic): CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11bHysteresisV2
OID (numeric): 1.3.6.1.4.1.9.9.523.1.2.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object specifies how much stronger the signal strength (dB) of a neighbor AP must be, in order for the client to roam to it. The use of roaming hysteresis is intended to reduce the amount of clients roaming back and forth between BSSs if the client is physically located on or near the border between two BSSs.
What is clcrDot11bHysteresisV2?
A newer (V2) read-write value for how much stronger a neighboring AP's signal must be before an 802.11b/g client roams to it, used to limit repeated roaming.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.523.1.2.7 snmpwalk -v2c -c public <target> CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11bHysteresisV2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.523.1.2.7.1 snmpget -v2c -c public <target> CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11bHysteresisV2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.523.1.2.7.1 i <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11bHysteresisV2 OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.523 | ciscoLwappClRoamMIB | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1 | ciscoLwappClRoamMIBObjects | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1.2 | clcrRoamDot11bRfParamConfig | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1.2.7 | clcrDot11bHysteresisV2 | CISCO-LWAPP-CLIENT-ROAMING-MIB |