All MIBs › CISCO-LWAPP-CLIENT-ROAMING-MIB › clcrDot11bAdaptiveScanThresholdV2
clcrDot11bAdaptiveScanThresholdV2
Module: CISCO-LWAPP-CLIENT-ROAMING-MIB
OID (symbolic): CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11bAdaptiveScanThresholdV2
OID (numeric): 1.3.6.1.4.1.9.9.523.1.2.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object specifies the threshold for the strength of the signals received(RSSI) from an AP, as seen by an associated client, below which the client must be able to roam to a neighbor AP within the specified Transition Time configured through clcrDot11bTransitionTime.
What is clcrDot11bAdaptiveScanThresholdV2?
A newer (V2) read-write RSSI threshold for 802.11b/g clients that triggers a roam scan to a neighboring AP once signal strength drops below it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.523.1.2.8 snmpwalk -v2c -c public <target> CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11bAdaptiveScanThresholdV2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.523.1.2.8.1 snmpget -v2c -c public <target> CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11bAdaptiveScanThresholdV2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.523.1.2.8.1 i <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11bAdaptiveScanThresholdV2 OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.523 | ciscoLwappClRoamMIB | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1 | ciscoLwappClRoamMIBObjects | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1.2 | clcrRoamDot11bRfParamConfig | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1.2.8 | clcrDot11bAdaptiveScanThresholdV2 | CISCO-LWAPP-CLIENT-ROAMING-MIB |