All MIBs › CISCO-LWAPP-CLIENT-ROAMING-MIB › clcrDot11aTransitionTimeV2
clcrDot11aTransitionTimeV2
Module: CISCO-LWAPP-CLIENT-ROAMING-MIB
OID (symbolic): CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11aTransitionTimeV2
OID (numeric): 1.3.6.1.4.1.9.9.523.1.1.9
Node type: OBJECT-TYPE
Type: TimeInterval
Access: read-write
Description: This object specifies the maximum time duration permitted for the client to detect a suitable neighbor AP to roam to and to complete the roam, whenever the RSSI from the clients associated AP is below the adaptive scan threshold configured through clcrDot11aAdaptiveScanThreshold. The time is expressed in 100th of a second.
What is clcrDot11aTransitionTimeV2?
A newer (V2) read-write setting for the maximum time an 802.11a client is allowed to detect and complete a roam to a neighbor AP after signal strength falls below the adaptive scan threshold.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.523.1.1.9 snmpwalk -v2c -c public <target> CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11aTransitionTimeV2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.523.1.1.9.1 snmpget -v2c -c public <target> CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11aTransitionTimeV2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.523.1.1.9.1 s <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11aTransitionTimeV2 OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.523 | ciscoLwappClRoamMIB | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1 | ciscoLwappClRoamMIBObjects | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1.1 | clcrRoamDot11aRfParamConfig | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1.1.9 | clcrDot11aTransitionTimeV2 | CISCO-LWAPP-CLIENT-ROAMING-MIB |