CISCO-LWAPP-CLIENT-ROAMING-MIB :: clcrDot11aMinRssi

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-LWAPP-CLIENT-ROAMING-MIB › clcrDot11aMinRssi

clcrDot11aMinRssi

Module: CISCO-LWAPP-CLIENT-ROAMING-MIB

OID (symbolic): CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11aMinRssi

OID (numeric): 1.3.6.1.4.1.9.9.523.1.1.2

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This object specifies the Minimum Received Signal Strength Indication (RSSI) in dBm required to associate with the AP. It also defines the edge of coverage for the BSS. If the client's average received signal power dips below this threshold, clients must have roamed to another AP with a stronger signal.

This object is superceded by clcrDot11aMinRssiV2 clcrDot11aMinRssi object is superseded by clcrDot11aMinRssiV2.

What is clcrDot11aMinRssi?

A read-write setting for the minimum received signal strength (RSSI, in dBm) an 802.11a client must see from an AP to associate with it, effectively defining the edge-of-coverage boundary for that access point's cell.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.523.1.1.2
snmpwalk -v2c -c public <target> CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11aMinRssi

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.523.1.1.2.1
snmpget -v2c -c public <target> CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11aMinRssi.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.523.1.1.2.1 i <value>

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11aMinRssi OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.523ciscoLwappClRoamMIBCISCO-LWAPP-CLIENT-ROAMING-MIB
1.3.6.1.4.1.9.9.523.1ciscoLwappClRoamMIBObjectsCISCO-LWAPP-CLIENT-ROAMING-MIB
1.3.6.1.4.1.9.9.523.1.1clcrRoamDot11aRfParamConfigCISCO-LWAPP-CLIENT-ROAMING-MIB
1.3.6.1.4.1.9.9.523.1.1.2clcrDot11aMinRssiCISCO-LWAPP-CLIENT-ROAMING-MIB