All MIBs › CISCO-LWAPP-CLIENT-ROAMING-MIB › clcrDot11aHysteresis
clcrDot11aHysteresis
Module: CISCO-LWAPP-CLIENT-ROAMING-MIB
OID (symbolic): CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11aHysteresis
OID (numeric): 1.3.6.1.4.1.9.9.523.1.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object specifies how much stronger the signal strength (dB) of a neighbor AP must be, in order for the client to roam to it. The use of roaming hysteresis is intended to reduce the amount of clients roaming back and forth between BSSs if the client is physically located on or near the border between two BSSs.
This object is superceded by clcrDot11aHysteresisV2 clcrDot11aHysteresis object is superseded by clcrDot11aHysteresisV2.
What is clcrDot11aHysteresis?
A read-write value specifying how much stronger (in dB) a neighboring AP's signal must be, relative to the current one, before an 802.11a client is allowed to roam to it, reducing back-and-forth roaming between two APs.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.523.1.1.3 snmpwalk -v2c -c public <target> CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11aHysteresis
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.523.1.1.3.1 snmpget -v2c -c public <target> CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11aHysteresis.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.523.1.1.3.1 i <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-CLIENT-ROAMING-MIB::clcrDot11aHysteresis OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.523 | ciscoLwappClRoamMIB | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1 | ciscoLwappClRoamMIBObjects | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1.1 | clcrRoamDot11aRfParamConfig | CISCO-LWAPP-CLIENT-ROAMING-MIB |
| 1.3.6.1.4.1.9.9.523.1.1.3 | clcrDot11aHysteresis | CISCO-LWAPP-CLIENT-ROAMING-MIB |