CISCO-LINK-ERROR-MONITOR-MIB :: clemThresholdLow

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-LINK-ERROR-MONITOR-MIB › clemThresholdLow

clemThresholdLow

Module: CISCO-LINK-ERROR-MONITOR-MIB

OID (symbolic): CISCO-LINK-ERROR-MONITOR-MIB::clemThresholdLow

OID (numeric): 1.3.6.1.4.1.9.9.426.1.1.5.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: Specifies the low threshold for an error counter type. When the increase in this error counter type on an interface between two consecutive sampling exceeds the instance value of clemThresholdLow for this error counter type consecutively for clemSamplingTimes number of times, a clemLowThresholdExceeded notification on that interface will be sent.

What is clemThresholdLow?

A read-write setting for the low threshold of an error counter type; crossing it between samples triggers a low-threshold condition on the interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.426.1.1.5.1.2
snmpwalk -v2c -c public <target> CISCO-LINK-ERROR-MONITOR-MIB::clemThresholdLow

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.426.1.1.5.1.2.1
snmpget -v2c -c public <target> CISCO-LINK-ERROR-MONITOR-MIB::clemThresholdLow.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.426.1.1.5.1.2.1 i <value>

Start monitoring Cisco switches and routers (link error monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LINK-ERROR-MONITOR-MIB::clemThresholdLow OID value, configure state conditions and alerts, and monitor any Cisco switches and routers (link error monitoring) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.426ciscoLinkErrorMonitorMIBCISCO-LINK-ERROR-MONITOR-MIB
1.3.6.1.4.1.9.9.426.1ciscoLinkErrMonMIBObjectsCISCO-LINK-ERROR-MONITOR-MIB
1.3.6.1.4.1.9.9.426.1.1clemGlobalObjectsCISCO-LINK-ERROR-MONITOR-MIB
1.3.6.1.4.1.9.9.426.1.1.5clemThresholdTableCISCO-LINK-ERROR-MONITOR-MIB
1.3.6.1.4.1.9.9.426.1.1.5.1clemThresholdEntryCISCO-LINK-ERROR-MONITOR-MIB
1.3.6.1.4.1.9.9.426.1.1.5.1.2clemThresholdLowCISCO-LINK-ERROR-MONITOR-MIB