All MIBs › CISCO-LINK-ERROR-MONITOR-MIB › clemThresholdHigh
clemThresholdHigh
Module: CISCO-LINK-ERROR-MONITOR-MIB
OID (symbolic): CISCO-LINK-ERROR-MONITOR-MIB::clemThresholdHigh
OID (numeric): 1.3.6.1.4.1.9.9.426.1.1.5.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: Specifies the high threshold for an error counter type. When the increase in this error counter type on an interface between two consecutive sampling exceeds the instance value of clemThresholdHigh for this error counter type consecutively for clemSamplingTimes number of times, a clemHighThresholdExceeded notification on that interface will be sent. And, the action specified by clemAction will be taken on that interface. The instance value of this clemThresholdHigh must be greater than the instance value of the clemThresholdLow of the same row.
What is clemThresholdHigh?
A read-write setting for the high threshold of an error counter type; crossing it between samples triggers a high-threshold condition (and possible corrective action) on the interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.426.1.1.5.1.3 snmpwalk -v2c -c public <target> CISCO-LINK-ERROR-MONITOR-MIB::clemThresholdHigh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.426.1.1.5.1.3.1 snmpget -v2c -c public <target> CISCO-LINK-ERROR-MONITOR-MIB::clemThresholdHigh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.426.1.1.5.1.3.1 i <value>
Start monitoring Cisco switches and routers (link error monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LINK-ERROR-MONITOR-MIB::clemThresholdHigh OID value, configure state conditions and alerts, and monitor any Cisco switches and routers (link error monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.426 | ciscoLinkErrorMonitorMIB | CISCO-LINK-ERROR-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.426.1 | ciscoLinkErrMonMIBObjects | CISCO-LINK-ERROR-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.426.1.1 | clemGlobalObjects | CISCO-LINK-ERROR-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.426.1.1.5 | clemThresholdTable | CISCO-LINK-ERROR-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.426.1.1.5.1 | clemThresholdEntry | CISCO-LINK-ERROR-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.426.1.1.5.1.3 | clemThresholdHigh | CISCO-LINK-ERROR-MONITOR-MIB |