All MIBs › CISCO-LICENSE-MIB › celLicenseUpdateSequenceNum
celLicenseUpdateSequenceNum
Module: CISCO-LICENSE-MIB
OID (symbolic): CISCO-LICENSE-MIB::celLicenseUpdateSequenceNum
OID (numeric): 1.3.6.1.4.1.9.9.359.1.1.1.1.7
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: This value shows the license update sequence number as contained in the license itself. Each time licenses are updated or installed, this object is assigned the sequence number that is a part of the license being installed.
Depending upon the implementation, it serves the purpose of preventing the reuse of an already installed license, especially when that license is applied in additive mode.
When an attempt is made to update/install the licenses, the implementation may allow update only if the new license's sequence number is greater than the last installed license sequence number.
If the license update/installation is successful, this object reflects the new license sequence number and can be used to detect if attempt is being made to reuse a previous license.
This value is greater than zero.
What is celLicenseUpdateSequenceNum?
Reports the update sequence number embedded within the license itself at the time it was installed or updated, letting administrators correlate device records with the license's own versioning.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.359.1.1.1.1.7 snmpwalk -v2c -c public <target> CISCO-LICENSE-MIB::celLicenseUpdateSequenceNum
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.359.1.1.1.1.7.1 snmpget -v2c -c public <target> CISCO-LICENSE-MIB::celLicenseUpdateSequenceNum.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> celLicenseUpdateSequenceNum.1
Start monitoring Cisco IOS/IOS-XE router or switch (license entitlements) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LICENSE-MIB::celLicenseUpdateSequenceNum OID value, configure state conditions and alerts, and monitor any Cisco IOS/IOS-XE router or switch (license entitlements) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.359 | ciscoLicenseMIB | CISCO-LICENSE-MIB |
| 1.3.6.1.4.1.9.9.359.1 | celMIBObjects | CISCO-LICENSE-MIB |
| 1.3.6.1.4.1.9.9.359.1.1 | celGeneral | CISCO-LICENSE-MIB |
| 1.3.6.1.4.1.9.9.359.1.1.1 | celLicenseConfigHistoryTable | CISCO-LICENSE-MIB |
| 1.3.6.1.4.1.9.9.359.1.1.1.1 | celLicenseConfigHistoryEntry | CISCO-LICENSE-MIB |
| 1.3.6.1.4.1.9.9.359.1.1.1.1.7 | celLicenseUpdateSequenceNum | CISCO-LICENSE-MIB |