All MIBs › CISCO-L2-TUNNEL-CONFIG-MIB › cltcTunneledProtocolType
cltcTunneledProtocolType
Module: CISCO-L2-TUNNEL-CONFIG-MIB
OID (symbolic): CISCO-L2-TUNNEL-CONFIG-MIB::cltcTunneledProtocolType
OID (numeric): 1.3.6.1.4.1.9.9.246.1.3.1.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: Indicates tunneled protocol of the interface.
If a BIT is set, then the value of the corresponding protocol is tunneled. Specifically, if the 'cdp(0)' BIT is set, then the Cisco Discovery Protocol PDU is tunneled; if the 'vtp(1)' BIT is set, then the VLAN Trunking Protocol PDU is tunneled; if the 'stp(2)' BIT is set, then the Spanning Tree Protocol PDU is tunneled; if the 'eoam(3)' BIT is set, then the ethernet Operation, Administration and Maintenance PDU is tunneled; if the 'lldp(4)' BIT is set, then the Link Layer Discovery Protocol is tunneled.
If the bit for a given protocol is set for an interface, then the statistics for that interface and protocol will start to be monitored.
What is cltcTunneledProtocolType?
A bitmap indicating which Layer 2 protocols (such as CDP, VTP) are tunneled across the interface; a set bit means PDUs for that protocol are passed through the tunnel rather than processed locally.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.246.1.3.1.1.1 snmpwalk -v2c -c public <target> CISCO-L2-TUNNEL-CONFIG-MIB::cltcTunneledProtocolType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.246.1.3.1.1.1.1 snmpget -v2c -c public <target> CISCO-L2-TUNNEL-CONFIG-MIB::cltcTunneledProtocolType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.246.1.3.1.1.1.1 s <value>
Start monitoring Cisco service-provider edge switches (Metro Ethernet/L2PT) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-L2-TUNNEL-CONFIG-MIB::cltcTunneledProtocolType OID value, configure state conditions and alerts, and monitor any Cisco service-provider edge switches (Metro Ethernet/L2PT) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.246 | ciscoL2TunnelConfigMIB | CISCO-L2-TUNNEL-CONFIG-MIB |
| 1.3.6.1.4.1.9.9.246.1 | cltcMIBObjects | CISCO-L2-TUNNEL-CONFIG-MIB |
| 1.3.6.1.4.1.9.9.246.1.3 | cltcTunneledProtocol | CISCO-L2-TUNNEL-CONFIG-MIB |
| 1.3.6.1.4.1.9.9.246.1.3.1 | cltcTunneledProtocolTable | CISCO-L2-TUNNEL-CONFIG-MIB |
| 1.3.6.1.4.1.9.9.246.1.3.1.1 | cltcTunneledProtocolEntry | CISCO-L2-TUNNEL-CONFIG-MIB |
| 1.3.6.1.4.1.9.9.246.1.3.1.1.1 | cltcTunneledProtocolType | CISCO-L2-TUNNEL-CONFIG-MIB |