CISCO-L2-TUNNEL-CONFIG-MIB :: cltcTunnelDropThreshold

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-L2-TUNNEL-CONFIG-MIB › cltcTunnelDropThreshold

cltcTunnelDropThreshold

Module: CISCO-L2-TUNNEL-CONFIG-MIB

OID (symbolic): CISCO-L2-TUNNEL-CONFIG-MIB::cltcTunnelDropThreshold

OID (numeric): 1.3.6.1.4.1.9.9.246.1.4.1.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The drop threshold on an interface for a given protocol. After reaching this drop threshold, the interface will start dropping PDUs for the given protocol. This value cannot be greater than the value of cltcTunnelShutdownThreshold. A value of 0 indicates that no limit is set.

What is cltcTunnelDropThreshold?

Sets the per-protocol, per-interface drop threshold for tunneled traffic; once reached the interface begins dropping PDUs for that protocol, and the value cannot exceed the configured shutdown threshold.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.246.1.4.1.1.2
snmpwalk -v2c -c public <target> CISCO-L2-TUNNEL-CONFIG-MIB::cltcTunnelDropThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.246.1.4.1.1.2.1
snmpget -v2c -c public <target> CISCO-L2-TUNNEL-CONFIG-MIB::cltcTunnelDropThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.246.1.4.1.1.2.1 i <value>

Start monitoring Cisco service-provider edge switches (Metro Ethernet/L2PT) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-L2-TUNNEL-CONFIG-MIB::cltcTunnelDropThreshold OID value, configure state conditions and alerts, and monitor any Cisco service-provider edge switches (Metro Ethernet/L2PT) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.246ciscoL2TunnelConfigMIBCISCO-L2-TUNNEL-CONFIG-MIB
1.3.6.1.4.1.9.9.246.1cltcMIBObjectsCISCO-L2-TUNNEL-CONFIG-MIB
1.3.6.1.4.1.9.9.246.1.4cltcTunnelThresholdCISCO-L2-TUNNEL-CONFIG-MIB
1.3.6.1.4.1.9.9.246.1.4.1cltcTunnelThresholdTableCISCO-L2-TUNNEL-CONFIG-MIB
1.3.6.1.4.1.9.9.246.1.4.1.1cltcTunnelThresholdEntryCISCO-L2-TUNNEL-CONFIG-MIB
1.3.6.1.4.1.9.9.246.1.4.1.1.2cltcTunnelDropThresholdCISCO-L2-TUNNEL-CONFIG-MIB