CISCO-L2-CONTROL-MIB :: clcMacLimitExceededActionDefault

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-L2-CONTROL-MIB › clcMacLimitExceededActionDefault

clcMacLimitExceededActionDefault

Module: CISCO-L2-CONTROL-MIB

OID (symbolic): CISCO-L2-CONTROL-MIB::clcMacLimitExceededActionDefault

OID (numeric): 1.3.6.1.4.1.9.9.313.1.1.3

Node type: OBJECT-TYPE

Type: MacLimitExceededAction

Access: read-write

Description: The global default action to be taken by the system when the number of MAC addresses in the forwarding table has exceeded the low threshold number of MAC address limit for a VLAN or an interface or for interface-VLAN pair.

What is clcMacLimitExceededActionDefault?

This read-write object configures the default action the system takes when the number of learned MAC addresses exceeds the configured lower threshold for a VLAN, interface, or interface-VLAN pair. It defines the global fallback response to MAC limit violations.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.313.1.1.3
snmpwalk -v2c -c public <target> CISCO-L2-CONTROL-MIB::clcMacLimitExceededActionDefault

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.313.1.1.3.1
snmpget -v2c -c public <target> CISCO-L2-CONTROL-MIB::clcMacLimitExceededActionDefault.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.313.1.1.3.1 s <value>

Start monitoring Cisco routers/switches (Layer 2 MAC-limit/unicast flooding control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-L2-CONTROL-MIB::clcMacLimitExceededActionDefault OID value, configure state conditions and alerts, and monitor any Cisco routers/switches (Layer 2 MAC-limit/unicast flooding control) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.313ciscoL2ControlMIBCISCO-L2-CONTROL-MIB
1.3.6.1.4.1.9.9.313.1ciscoL2ControlMIBObjectsCISCO-L2-CONTROL-MIB
1.3.6.1.4.1.9.9.313.1.1clcMacAddressLimitObjectsCISCO-L2-CONTROL-MIB
1.3.6.1.4.1.9.9.313.1.1.3clcMacLimitExceededActionDefaultCISCO-L2-CONTROL-MIB