All MIBs › CISCO-L2-CONTROL-MIB › clcIfMacLimitGlobalConfig
clcIfMacLimitGlobalConfig
Module: CISCO-L2-CONTROL-MIB
OID (symbolic): CISCO-L2-CONTROL-MIB::clcIfMacLimitGlobalConfig
OID (numeric): 1.3.6.1.4.1.9.9.313.1.3.1.1.3
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: This object indicates whether the configurations for this interface are based on the corresponding global default configurations or not.
ifMacLimitLow(0) : indicates that the value of clcIfMacLimitLow is based on the value of clcMaxMacLimitDefault if this bit is set.
ifLimitLowExceededAction(1) : indicates that the value of clcIfMacLimitLowExceedAction is based on the value of clcMacLimitExceededActionDefault if this bit is set.
ifMacLimitHigh(2) : indicates that the value of clcIfMacLimitHigh is based on the value of clcMacLimitHighDefault if this bit is set.
ifLimitHighExceededAction(3) : indicates that the value of clcIfMacLimitHighExceedAction is based on the value of clcMacLimitHighExceedActionDef if this bit is set.
What is clcIfMacLimitGlobalConfig?
A read-only value indicating whether an interface's MAC limit settings are inherited from the global default configuration rather than set locally.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.313.1.3.1.1.3 snmpwalk -v2c -c public <target> CISCO-L2-CONTROL-MIB::clcIfMacLimitGlobalConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.313.1.3.1.1.3.1 snmpget -v2c -c public <target> CISCO-L2-CONTROL-MIB::clcIfMacLimitGlobalConfig.1
Start monitoring Cisco routers/switches (Layer 2 MAC-limit/unicast flooding control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-L2-CONTROL-MIB::clcIfMacLimitGlobalConfig OID value, configure state conditions and alerts, and monitor any Cisco routers/switches (Layer 2 MAC-limit/unicast flooding control) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.313 | ciscoL2ControlMIB | CISCO-L2-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.313.1 | ciscoL2ControlMIBObjects | CISCO-L2-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.313.1.3 | clcIfMacAddressLimitObjects | CISCO-L2-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.313.1.3.1 | clcIfMacLimitTable | CISCO-L2-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.313.1.3.1.1 | clcIfMacLimitEntry | CISCO-L2-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.313.1.3.1.1.3 | clcIfMacLimitGlobalConfig | CISCO-L2-CONTROL-MIB |