CISCO-ITP-MONITOR-MIB :: cItpmConnKeepAlive

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-ITP-MONITOR-MIB › cItpmConnKeepAlive

cItpmConnKeepAlive

Module: CISCO-ITP-MONITOR-MIB

OID (symbolic): CISCO-ITP-MONITOR-MIB::cItpmConnKeepAlive

OID (numeric): 1.3.6.1.4.1.9.9.379.1.1.1.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: Specifies the keepalive time value in milliseconds. Keepalive packets are sent between the monitor and the remote server as a mechanism to ensure the TCP session is active and detect session failure in a timely manner. During periods of idle monitor traffic, the monitor will send a keepalive packet to the remote server at the specified interval. The monitor also expects to receive a keepalive packet from the remote server at the same interval. If the monitor does not receive a keepalive packet from the remote server in two times the keep alive value, the monitor will close the TCP session. The value of zero disables the keep alive processing.

What is cItpmConnKeepAlive?

Read-write setting (in milliseconds) for the TCP keepalive interval between the ITP monitor and remote server, used to confirm the session is still active and detect failures promptly.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.379.1.1.1.1.2
snmpwalk -v2c -c public <target> CISCO-ITP-MONITOR-MIB::cItpmConnKeepAlive

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.379.1.1.1.1.2.1
snmpget -v2c -c public <target> CISCO-ITP-MONITOR-MIB::cItpmConnKeepAlive.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.379.1.1.1.1.2.1 i <value>

Start monitoring Cisco IP Transfer Point (ITP) SS7 signaling gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ITP-MONITOR-MIB::cItpmConnKeepAlive OID value, configure state conditions and alerts, and monitor any Cisco IP Transfer Point (ITP) SS7 signaling gateway (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.379ciscoItpmMIBCISCO-ITP-MONITOR-MIB
1.3.6.1.4.1.9.9.379.1ciscoItpmMIBObjectsCISCO-ITP-MONITOR-MIB
1.3.6.1.4.1.9.9.379.1.1cItpmConnCISCO-ITP-MONITOR-MIB
1.3.6.1.4.1.9.9.379.1.1.1cItpmConnTableCISCO-ITP-MONITOR-MIB
1.3.6.1.4.1.9.9.379.1.1.1.1cItpmConnTableEntryCISCO-ITP-MONITOR-MIB
1.3.6.1.4.1.9.9.379.1.1.1.1.2cItpmConnKeepAliveCISCO-ITP-MONITOR-MIB