All MIBs › CISCO-IP-LOCAL-POOL-MIB › cIpLocalPoolStatInUseAddrThldHi
cIpLocalPoolStatInUseAddrThldHi
Module: CISCO-IP-LOCAL-POOL-MIB
OID (symbolic): CISCO-IP-LOCAL-POOL-MIB::cIpLocalPoolStatInUseAddrThldHi
OID (numeric): 1.3.6.1.4.1.9.9.326.1.3.1.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: When the number of used addresses in an IP local pool is equal or exceeds this threshold value, a ciscoIpLocalPoolInUseAddrNoti notification will be generated. Once this notification is generated, it will be disarmed and it will not be generated again until the number of used address falls below the value indicated by cIpLocalPoolStatInUseAddrThldLo.
The value of this object should never be smaller than the value of cIpLocalPoolStatInUseAddrThldLo.
What is cIpLocalPoolStatInUseAddrThldHi?
A configurable high-water-mark threshold for the number of addresses in use in an IP local address pool; when usage reaches or exceeds it, the device sends a ciscoIpLocalPoolInUseAddrNoti notification (and re-arms only after usage drops back down).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.326.1.3.1.1.5 snmpwalk -v2c -c public <target> CISCO-IP-LOCAL-POOL-MIB::cIpLocalPoolStatInUseAddrThldHi
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.326.1.3.1.1.5.1 snmpget -v2c -c public <target> CISCO-IP-LOCAL-POOL-MIB::cIpLocalPoolStatInUseAddrThldHi.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.326.1.3.1.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cIpLocalPoolStatInUseAddrThldHi.1
Start monitoring Cisco VPN/dial access gateways and broadband aggregation routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IP-LOCAL-POOL-MIB::cIpLocalPoolStatInUseAddrThldHi OID value, configure state conditions and alerts, and monitor any Cisco VPN/dial access gateways and broadband aggregation routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.326 | ciscoIpLocalPoolMIB | CISCO-IP-LOCAL-POOL-MIB |
| 1.3.6.1.4.1.9.9.326.1 | ciscoIpLocalPoolMIBObjects | CISCO-IP-LOCAL-POOL-MIB |
| 1.3.6.1.4.1.9.9.326.1.3 | cIpLocalPoolStats | CISCO-IP-LOCAL-POOL-MIB |
| 1.3.6.1.4.1.9.9.326.1.3.1 | cIpLocalPoolStatsTable | CISCO-IP-LOCAL-POOL-MIB |
| 1.3.6.1.4.1.9.9.326.1.3.1.1 | cIpLocalPoolStatsEntry | CISCO-IP-LOCAL-POOL-MIB |
| 1.3.6.1.4.1.9.9.326.1.3.1.1.5 | cIpLocalPoolStatInUseAddrThldHi | CISCO-IP-LOCAL-POOL-MIB |